úvodní stránka
úvodní stránka
Production program

Shirring Machines

Printing Machines

Moistening and Rewinding Machines



- Shirring Machines - ASM 6P



Automatic Shirring Machine

ASM 6P - Shirring Machine

ASM 6P - Shirring Machine 


Description of the machine


The ASM 6P Shirring Machine has been designed for automatic continuous shirring of PA sausage casings using a screw system. The machine can be adapted for processing of casings from diameter 23 up to 32 mm like a standard (17 – 35 mm on a request). Accessory equipment is available for closing of the shirred stick ends. The shirring process is completely continuous. Control of the machine operation is limited to replacement of disks with casings and collecting of shirred sticks. The shirring process is powered by a set of electrical and pneumatic elements (SMC).

The disk with casing is fixed on the unwinding part of equipment with a detector which stops the machine when the whole length of casing on the disk has been unwind off. The band of the casing is guided through a moistening device and metering rollers into a vacuum chamber and onto an inlet mandrel where, due to vacuum, it is inflated and transferred to the screw shirring head. The machine is equiped with outside oiling of the casing as well. Shirred casing is advanced onto one of six mandrels where a cutting mechanism cuts it off as soon as the pre-set length has been reached. In stepby-step turning of a revolver head with mandrels the casing is relocated to the pressing mechanism, where it is pressed together (the end of the sticks can be dressed by a finisher, if used). Finished shirred sticks are collected on a discharge desk.

In case of any failure the machine is automatically stopped and a programmable PLC (LENZE) indicates the faulty element.

Priorities

  • The continuous process of shirring
  • The wide range of processed casing diameters (another diameters on request)
  • The very low energy consumption
  • The low noise level
  • The space-sawing design
  • The adjustable to various shirring diameters
  • The finisher for closed shirred sticks on a request


The producer has all rights reserved to change design of the shirring machines and parts, which has no influence to right function of the machines.
contact | e-mail | home | top
Copyright © 2002-2017 Fin-Form s.r.o. All rights reserved.
Programming & Webhosting by MagicHouse s.r.o.